Slingshot Rally kite
How to set up your Slingshot Rally kite?
1. Bridles to the center lines
When you rig up your Slingshot Kite (rigging your bar from behind the kite), make sure that your bridles to which the front lines are attached, look the same as the picture above. The bridles of the kite must not be tangled or twisted and the small red line must be on top (unless you fly a Slingshot Rally or Fuel).
2. How to trim your Slingshot Rally?
Our favourite setting is the one you can see on the picture above. We use on the back lines (left) the first knot (the knot furthes away from your Rally kite), and on the center lines (right) the second knot. This is our standard setting and we think the Rally kite flies best this way. Only in very light wind we recommend to use the first knot on the center line, and in very strong, overpowered conditions, when you don’t have a smaller kite available, the third knot of the center lines to trim your Rally kite.
3. Bar pressure - kite feedback
There are four attachment points for bar pressure. On the picture above you can see how the kite comes out of the box. The bar pressure ist mostly personal preference, you can try out all settings and decide for yourself what fits you and your style of riding best,.
Check out how to extend the lifetime of your kite in the Slingshot Rally manual
Tips & Tricks
How to extend the liftime of your Slingshot Rally?
>>Slingshot Rally manual
How to set up and trim your Slingshot Rally kite?
>>
Slingshot Rally kite
Tutorial Video:
>> How to change the depower rope of your Slingshot bar
Should I purchase the RPM or Rally kite?
>> RPM vs. Rally